//=============================================================================
// File: Fluidwell F074 Library
// Version: 1.1
// Date: 2012-01-04 10:25:00
//=============================================================================
// following variables should be equal to the entries found in products.js
var productName = "f074";
var productScreen = "F074";
var productLink = "f074.html";
var productDatasheet = "F074-DATA-EN-V1151.pdf";
var productSchematicScreen = "f074sch_scr.gif";
var productSchematicPrint = "f074sch_prn.gif";
var productPhotoScreen = "f074pho_scr.gif";
var productPhotoPrint = "f074pho_prn.gif";
var productLCDScreen = "f074lcd_scr.gif";
var productLCDPrint = "f074lcd_prn.gif";
var productTitle = "Level / pump controller";
var productSubtitle = "with one control output";
// following variables are always created as arrays and later filled with strings
var productArrayDescription = new Array();
var productArrayFeatures = new Array();
var productArrayApplications = new Array();
var productArrayInputs = new Array();
var productArrayInputsFlow = new Array();
var productArrayInputsTemperature = new Array();
var productArrayInputsLevel = new Array();
var productArrayInputsPressure = new Array();
var productArrayInputsStatus = new Array();
var productArrayInputsGeneral = new Array();
var productArrayOutputs = new Array();
var productArrayOutputsPulse = new Array();
var productArrayOutputsAlarm = new Array();
var productArrayOutputsAnalog = new Array();
var productArrayOutputsControl = new Array();
var productArraySupply = new Array();
var productArraySupplyPower = new Array();
var productArraySupplySensor = new Array();
var productArrayHazardous = new Array();
var productArrayHazardousIS = new Array();
var productArrayHazardousNI = new Array();
var productArrayHazardousEP = new Array();
var productArrayCommunication = new Array();
productArrayInputs[0] = productArrayInputsFlow;
productArrayInputs[1] = productArrayInputsTemperature;
productArrayInputs[2] = productArrayInputsLevel;
productArrayInputs[3] = productArrayInputsPressure;
productArrayInputs[4] = productArrayInputsStatus;
productArrayInputs[5] = productArrayInputsGeneral;
productArrayOutputs[0] = productArrayOutputsPulse;
productArrayOutputs[1] = productArrayOutputsAlarm;
productArrayOutputs[2] = productArrayOutputsAnalog;
productArrayOutputs[3] = productArrayOutputsControl;
productArraySupply[0] = productArraySupplyPower;
productArraySupply[1] = productArraySupplySensor;
productArrayHazardous[0] = productArrayHazardousIS;
productArrayHazardous[1] = productArrayHazardousNI;
productArrayHazardous[2] = productArrayHazardousEP;
//=============================================================================
// Main productArray name at productArray [x][0]
// ===== Following is old comment, not implemented this way! =====
// Every array should contain at least 2 items
// If item 1 is empty ('') we make no header and following items are separated by a
// If an other empty entry is found, we make an separation
// Also, if item 1 is empty, we make the class 'ModelUnboxedB'
// If item 1 has a ! as first char the following items are started with bullits
// The rest of the item 1 text is used as heading
// All lines or items should be followed by a ., but not the headings.
// Make entry 0 the description value?
// Or leftside contains features (list) and applications (no list) and rightside contains multiple lists?
productArrayDescription[0] = "The F074 is a basic level / pump controller that works with a preset value and two switch points to control a pump or valve. The low and high level switch points are entered as a percentage of the preset value to switch the device on / off. For pump control applications, the function can be inverted to empty a well. A stable level within a hysterese around the preset value is the result. The configuration of the Span, off-set and number of decimals is done through software functions, without any sensitive DIP-switches or trimmers. The display shows the actual level, preset value, high / low switch points and status.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications.";
productArrayFeatures[0] = "Features";
productArrayFeatures[1] = "Level control: high / low switch points and a preset value can be set.";
productArrayFeatures[2] = "Displays actual level, switch points, status and preset value.";
productArrayFeatures[3] = "Switch points and preset value can be set by the operator or they can be passcode protected.";
productArrayFeatures[4] = "One control output for on / off pump or value control.";
productArrayFeatures[5] = "Functions for filling-up a container or emptying a well or tank.";
productArrayFeatures[6] = "Level: six large 17mm (0.67") digits.";
productArrayFeatures[7] = "Selectable on-screen engineering units for level:
ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.";
productArrayFeatures[8] = "Selectable on-screen engineering units for height:
mm, cm, m, mtr, inch, ft, mmwk, mmwc, cmwk, cmwc, mwk, mwc, inwc, ftwc, mBar, Bar, PSI or no unit.";
productArrayFeatures[9] = "Green or amber LED backlight with adjustable intensity.";
productArrayFeatures[10] = "Auto backup of settings in EEPROM memory.";
productArrayFeatures[11] = "Operational temperature: -40°C to +80°C (-40°F to 176°F).";
productArrayFeatures[12] = "Very compact design for panel mount, wall mount or field mount applications.";
productArrayFeatures[13] = "Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.";
productArrayApplications[0] = "Applications";
productArrayApplications[1] = "Basic on / off level control applications without PI(D) control requirements.
Also very suitable for applications where the required level changes frequently.";
productArrayApplications[2] = "Alternative basic models: F070, F073, F077.
Alternative advanced model: F173.";
productArrayInputsLevel[0] = "Level Inputs";
productArrayInputsLevel[1] = "(0)4 – 20mA.";
productArrayInputsLevel[2] = "0 – 10V DC.";
productArrayOutputsControl[0] = "Control Outputs";
productArrayOutputsControl[1] = "Function: Control output to control a pump or valve, according to the high / low level switch point values.";
productArrayOutputsControl[2] = "Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.";
productArraySupplyPower[0] = "Power Supply";
productArraySupplyPower[1] = "Battery.";
productArraySupplyPower[2] = "4 – 20mA. Input Loop-powered.";
productArraySupplyPower[3] = "8 – 24V AC/DC.";
productArraySupplyPower[4] = "115 – 230V AC.";
productArraySupplySensor[0] = "Sensor Supply";
productArraySupplySensor[1] = "8.2, 12, 24V DC.";
productArrayHazardousIS[0] = "Intrinsically Safe";
productArrayHazardousIS[1] = "ATEX:
![](\"images/exi_exl.gif\")
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100 °C";
productArrayHazardousIS[2] = "IECEx:
Ga Ex ia IIC T4
Ex iaD 20 IP65 / 67 T100 °C";
productArrayHazardousIS[3] = "CSA:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4";
productArrayHazardousIS[4] = "FM:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4";
productArrayHazardousEP[0] = "Explosion Proof";
productArrayHazardousEP[1] = "ATEX:
II 2 GD EEx d IIB T5";
productArrayCommunication[0] = "Communication";
productArrayCommunication[1] = "Only available on F1-Series products.";