F013 - Flow rate monitor / totalizer

F013 - Flow rate monitor / totalizer
with one high / low alarm output

The F013 is a versatile flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the ability to set one low flow rate and one high flow rate alarm value. If desired, an alarm ignore function can be set up to allow for an incorrect flow rate for a certain period of time. The display shows flow rate, total, accumulated total, alarm values and alarm messages.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications.

Features
• Flow rate monitoring: two alarm values can be set: low and high flow rate alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• One alarm output for high, low or both combined flow rate alarms.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Red flashing LED backlight in case of a flow rate alarm; intensity adjustable.
• Displays clear alarm messages.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 178°F).
• Very compact design for panel mount, wall mount or field mount applications.
• Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.

Applications
Flow measurement where continuous flow rate monitoring is important without signal re-transmission.
Alternative advanced models: F113, F118.

Flowmeter Inputs
• Pulse type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
• (0)4 – 20mA.
• 0 – 10V DC.

Pulse Outputs
• None.

Alarm Outputs
• Function: Configurable alarm output for high, low or both combined flow rate alarms.
• Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Analog Outputs
• None.

Power Supply
• Battery.
• 4 – 20mA. Input Loop-powered.
• 8 – 24V AC/DC.
• 115 – 230V AC.

Sensor Supply
• 3.2, 8.2, 12, 24V DC.

Intrinsically Safe
• ATEX:
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100 °C
• IECEx:
Ga Ex ia IIC T4
Ex iaD 20 IP65 / 67 T100 °C
• CSA:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4
• FM:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4

Explosion Proof
• ATEX:
II 2 GD EEx d IIB T5

Communication
Only available on F1-Series products.