F016 - Flow rate indicator / totalizer

F016 - Flow rate indicator / totalizer
with linearization and pulse output

The F016 is a local indicator which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the pulse output.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications.

Features
• Eight point linearization of the flow curve - with interpolation.
• Scaled pulse output reflecting the accumulated total.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 178°F).
• Easy configuration with clear alphanumerical display.
• Very compact design for panel mount, wall mount or field mount applications.
• Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.

Applications
Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
Alternative advanced models: F112, F118.

Flowmeter Inputs
• Pulse type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
• (0)4 – 20mA.
• 0 – 10V DC.

Pulse Outputs
• Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
Max. frequency: 500Hz.
Adjustable pulse length from 1 msec. to 10 seconds.
• Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Alarm Outputs
• None.

Analog Outputs
• None.

Power Supply
• Battery.
• 4 – 20mA. Input Loop-powered.
• 8 – 24V AC/DC.
• 115 – 230V AC.

Sensor Supply
• 3.2, 8.2, 12, 24V DC.

Intrinsically Safe
• ATEX:
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100 °C
• IECEx:
Ga Ex ia IIC T4
Ex iaD 20 IP65 / 67 T100 °C
• CSA:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4
• FM:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4

Explosion Proof
• ATEX:
II 2 GD EEx d IIB T5

Communication
Only available on F1-Series products.