F030 - Batch controller

F030 - Batch controller
with one-stage control

The F030 is a straight forward but easy-to-use batch controller. The operator can easily enter a batch quantity or execute repeating batches. During the batch, the preset value is displayed as well as the batched or remaining quantity. The automatic self-learning overrun correction will ensure an accurate batch every time.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications.

Features
• Large display shows preset value and running batch value simultaneously.
• Self-learning overrun correction.
• One control output to drive a valve or pump.
• Easy operation to enter a batch value and to control the process.
• Count-up and count-down function available.
• Green or amber LED backlight with adjustable intensity.
• Actual batched quantity: seven 17mm (0.67") digits.
• Preset value: seven 17mm (0.67") digits during programming and 8mm (0.31") digits during process .
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Selectable on-screen engineering units for totalizer:
ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 178°F).
• Very compact design for panel mount, wall mount or field mount applications.
• Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.

Applications
For one stage batch applications at low or medium flowrates.
Alternative advanced models: F130, F131, F136.
Even more advanced models: 300-Series.

Flowmeter Inputs
• Pulse type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
• (0)4 – 20mA.
• 0 – 10V DC.

Status Inputs
• None.

Pulse Outputs
• None.

Alarm Outputs
• None.

Analog Outputs
• None.

Control Outputs
• Function: Control output for one-stage batching with active overrun correction.
• Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Power Supply
• Battery.
• 4 – 20mA. Input Loop-powered.
• 8 – 24V AC/DC.
• 115 – 230V AC.

Sensor Supply
• 3.2, 8.2, 12, 24V DC.

Intrinsically Safe
• ATEX:
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100 °C
• IECEx:
Ga Ex ia IIC T4
Ex iaD 20 IP65 / 67 T100 °C
• CSA:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4
• FM:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4

Explosion Proof
• ATEX:
II 2 GD EEx d IIB T5

Communication
Only available on F1-Series products.