F043 - Temperature monitor

F043 - Temperature monitor
with one high / low alarm output

The F043 is a versatile temperature indicator with continuous temperature monitoring feature. It offers the ability to set one low temperature and one high temperature alarm value. If desired, an ignore function can be set up to allow for an incorrect temperature for a certain period of time. The configuration of the Span, off-set and number of decimals is done through software functions, without any sensitive DIP-switches or trimmers. The display shows the actual temperature, alarm values, alarm messages and status.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications.

Features
• Temperature monitoring: two alarm values can be set: low and high temperature alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• One alarm output for high, low or both combined temperature alarms.
• Temperature: six large 17mm (0.67") digits.
• Selectable on-screen engineering units:
°C - °F - K.
• Red flashing LED backlight in case of a temperature alarm; intensity adjustable.
• Displays clear alarm messages.
• Auto backup of settings in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 178°F).
• Very compact design for panel mount, wall mount or field mount applications.
• Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.

Applications
For applications where continuous temperature measurement and monitoring is important without signal re-transmission.
Alternative basic model: F040.
Alternative advanced model: F143.

Temperature Inputs
• PT100 - 2, 3 or 4 wire PRTD sensor.
• (0)4 – 20mA.
• 0 – 10V DC.

Alarm Outputs
• Function: Configurable alarm output for high, low or both combined temperature alarms.
• Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Analog Outputs
• None.

Power Supply
• Battery.
• 4 – 20mA. Input Loop-powered.
• 8 – 24V AC/DC.
• 115 – 230V AC.

Sensor Supply
• 8.2, 12, 24V DC.

Intrinsically Safe
• ATEX:
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100 °C
• IECEx:
Ga Ex ia IIC T4
Ex iaD 20 IP65 / 67 T100 °C
• CSA:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4
• FM:
I.S. Class I / II / III, Div. 1, Grps A...G, T4
Class I, Zone 0, AEx ia IIC T4

Explosion Proof
• ATEX:
II 2 GD EEx d IIB T5

Communication
Only available on F1-Series products.