F153 - Pressure monitor

F153 - Pressure monitor
with high / low alarms and analog outputs

The F153 is a versatile pressure indicator featuring continuous pressure monitoring. It offers the ability to set two low and two high pressure alarm values. If desired, an ignore function can be set up to allow for an incorrect temperature for a certain period of time. Up to five outputs are available to transmit alarm conditions and actual pressure.
The display shows the actual pressure, alarm values, alarm messages and status. On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications and full Modbus communication.

Features
• Pressure monitoring: four alarm values can be set: low-low, low, high and high-high pressure alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• Analog output to transmit the actual pressure.
• Pressure and alarm values: six large 17mm (0.67") digits.
• Displays pressure, measuring unit and alarm messages simultaneously.
• Alarm ignore function allows an incorrect pressure for a certain period of time.
• Selectable on-screen engineering units:
mBar - Bar - PSI or no unit
• Green LED backlight.
• Backup of settings in EEPROM memory.
• Operational temperature: -30°C to +80°C (-22°F to 178°F).
• Very compact design for panel mount, wall mount or field mount applications.
• Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.

Applications
For applications where continuous pressure measurement and monitoring is important. Also signal re-transmission of the actual pressure or serial communication is required.
Alternative basic models: F050, F053.

Pressure Inputs
• (0)4 – 20mA.
• 0 – 10V DC.

Alarm Outputs
• Function: Configurable alarm outputs for low-low, low, high, high-high or all combined pressure alarms.
• Type: Up to three passive NPN transistors or active PNP transistors or up to four isolated electro-mechanical relays.

Analog Outputs
• Function: Re-transmitting the actual pressure - the output can be scaled to any range (e.g. -20°C to +200°C).
• Type: One passive isolated, floating or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.

Power Supply
• Battery.
• 4 – 20mA Loop-powered.
• 8 – 24V AC/DC.
• 115 – 230V AC.

Sensor Supply
• 8.2, 12, 24V DC.

Intrinsically Safe
• ATEX: II 1 GD EEx ia IIB/IIC T4 T 100 °C

Explosion Proof
• ATEX: II 2 G EEx d IIB T5

Communication
Function: All process data and settings can be read and modified through the communication link.
Protocol: Modbus ASCII / RTU.
Interface: RS232 / RS485 2-wire or 4-wire / TTL.