Personal Reliable Professional Outgoing

PERSONAL

Fluidwell stands for long term relationships and attentive and close cooperation. We go for personal relationships.

RELIABLE

Reliability of our products and high quality services are essential to us. You`ve got to have a Fluidwell, count on us.

PROFESSIONAL

Helping businesses grow by providing a dedication to mutually beneficial long term relationships. Your success is our goal.

OUTGOING

Progress and success are achieved due to our knowledgeable, friendly and competent staff. It happens at Fluidwell!

Customer login

Newsletter

Stay up to date with new developments.

Subscribe here >>

Twitter logo @Fluidwell

Ben jij Technical Author (m/v) en wil je graag werken bij Fluidwell? https://t.co/7HOGoaaKCC #Veghelmaakterwerkvan

ongeveer 10 uur geleden

More Tweets >>

Flow rate totalizers

General Information

Introduction

The product group "Flow rate Indicators / Totalizers" offers an extensive range of solutions from a basic transmitter / totalizer up to a powerful flow rate monitor with flow curve linearization, flow rate monitoring, signal transmission, alarm and pulse outputs as well as full Modbus communication.

The functionality of this product group is based on three product series:

  • E-Series: this is a range of user-friendly explosion proof indicators, transmitters, totalizers and monitoring systems especially designed to be used in harsh and difficult hazardous area applications. It is beyond being just explosion proof. The E-Series have been certified according ATEX, IECEx and CSA C-US with an ambient temperature of -40°C to +70°C (-40°F to +158°F). Its sturdy design and ease of use are unequaled by any other explosion proof indicator in the market!
  • F-Series: this product range is supplied in a robust IP67 (NEMA Type4X) field mount enclosure and suitable for safe and hazardous area applications. The F-Series have been certified according ATEX and IECEx by DEKRA and according CSA C-US and FM for use in Intrinsically Safe applications. The F-Series is resistant to harsh weather conditions (rain, snow, salty atmospheres, temperatures between -40°C/-40°F and +80°C/+178°F) without use of expensive protective cabinets.
  • D-Series: these products are supplied in a unique DIN panel mount enclosure and is only suitable for safe area applications. The robust IP66, IP67 (NEMA Type4X) front enclosure is made of die cast aluminum and is unequaled by any panel mounted indicator in the market: The D-Series is able to withstand total immersion and even powerful water jets! Click here to see an impressive waterproof demonstration of the D-Series.

Wireless data re-transmission and remote flow rate / totalizer monitoring is offered with the ProcessMonitor products and services .

Very user-friendly More >>

Easy to operate

The D-, E- and F-Series are outstanding user-friendly. No configuration with complicated hardware changes or actions! Instead, each product offers the same simple, logical menu-driven structure. Each setting is clearly indicated with an alphanumerical description, without confusing abbreviations and difficult codes. Once familiar with a Fluidwell product, you can program ALL models in ALL series without need for a manual: Know one, know them all!

Multi-applicable More >>

The D- and F-Series have so many different combination possibilities for sensor in- and outputs, power and sensor supplies, communication and external inputs, that Fluidwell is able to produce no less than 200,000 different versions! With this variety of combinations, there is always a D- or F-Series that meets your technical requirements. For an explanation of the various options, please read the section detailing the F-Series or the D-Series products.

HART Communication More >>

The F018 and E018 are available as flow rate monitor / totalizer with HART communication. The E018 is our first explosion proof flow rate monitor / totalizer with HART communication. The F018 is the only product in the F0-Series with communication and an analog output. Intrinsic Safety is available according ATEX and IECEx. As the F018 is slightly different to the rest of the F0-Series, the familiar ruggedness of the F-Series and the user-friendly operation remains exactly the same. Know one, know them all!

Free downloadable Device Specific DD.

Operator information More >>

The following features are available on all flow rate indicators / totalizers. Further product features can be found in the specific product page or datasheet.

  • Clear operator information is a key feature of these products. Essential information is displayed as clear text (e.g. "Low flow rate") and not as mysterious abbreviations.
  • The dedicated display shows two lines of information simultaneously along with its function like "flow rate" or "accumulated total" so the operator understands the displayed information.
  • The resettable total is displayed with seven 17mm (0.67") high digits with its engineering unit that is software selectable which makes the use of adhesive labels on the outside of the enclosure unnecessary. The following units can be selected through software: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
  • Accumulated total is displayed with eleven 8mm (0.31") digits and uses the same measuring unit as total.
  • Flow rate information is normally displayed with 8mm (0.31") digits at the bottom line of the display but can be set to 17mm (0.67") digits if desired. The measuring unit is selected separately from total. The following engineering units can be selected: mL - L - m³ - mg - g - kg - ton - GAL - bbl - lb - cf - REV - scf - Nm³ - NL - P or no unit. The flow rate can be calculated per second, minute, hour or per day.
  • The trend indication function shows an increase or decrease of the actual flow rate.

Signal input type More >>

For the flow rate / totalizers, three basic signal input types are available:

  • Pulse signals: sine wave (coil) low sensitivity (80mVp-p), sine wave high sensitivity (20mVp-p), Namur, NPN, PNP, reed-switch or active pulses. For most signals a low pass filter can be enabled to ignore pulse bounce. The sine wave input can even be supplied with 10mV or 5mVp-p sensitivity (option ZF and ZG).
  • Analog signal: (0)4 – 20mA or 4 – 20mA input loop powered version. The input signal can be tuned within this range (e.g. from 4.0mA to 10.0mA). To avoid counting at minimum signal, a low cut-off filter is available.
  • Analog signal: 0 – 10V DC. The input signal can be tuned within this range (e.g. from 2.0 to 5.0V DC). A low cut-off filter is available here too, to avoid counting at minimum signal.

Data protection More >>

All settings and totals are stored in EEPROM memory ensuring that no information is lost in the event of power failure or battery exchange.

To reset total, the CLEAR key must be pressed twice to avoid undesired initialization. Accumulated total cannot be reset to zero. The configuration menu and alarm values can be password protected to prevent unauthorized access.

 
Basic Flow rate Indicators / Totalizers
F010Field mount - Flow rate indicator with very large digits
F011Field mount - Totalizer with resettable total and non-resettable accumulated total
F012Field mount - Flow rate indicator / totalizer displays flow rate and total simultaneously
D010DIN Panel mount - Flow rate indicator with very large digits
D011DIN Panel mount - Totalizer with resettable total and non-resettable accumulated total
D012DIN Panel mount - Flow rate indicator / totalizer displays flow rate and total simultaneously
 
Flow rate Indicators / Totalizers with analog or pulse outputs
F014Field mount - Flow rate indicator / totalizer with pulse output
F016Field mount - Flow rate indicator / totalizer with linearization and pulse output
F018Field mount - Flow rate monitor / totalizer with linearization, pulse/alarm and analog outputs and HART communication
F110Field mount - Flow rate indicator / totalizer with analog and pulse outputs
F111Field mount - Dual input flow rate indicator / totalizer with two pulse outputs
F115Field mount - Bi-directional flow rate indicator / totalizer with analog, pulse signal and flow direction outputs
D014DIN Panel mount - Flow rate indicator / totalizer with pulse signal output
E018Explosion proof - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse signal outputs and HART Communication
E110Explosion proof - Flow rate indicator / totalizer with analog and pulse signal outputs
E112Explosion proof - Flow rate indicator / totalizer with linearization, analog and pulse outputs
 
Flow rate Monitors / Totalizers with high / low alarms
F013Field mount - Flow rate monitor / totalizer with one high / low alarm output
F018Field mount - Flow rate monitor / totalizer with linearization, pulse/alarm and analog outputs and HART communication
F113Field mount - Flow rate monitor / totalizer with high / low alarms, analog and pulse outputs
F117Field mount - Totalizer monitor with high / low totalizer alarms and analog output
F118Field mount - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse outputs
D013DIN Panel mount - Flow rate monitor / totalizer with high / low alarm output
E018Explosion proof - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse signal outputs and HART Communication
 
Flow rate Indicators / Totalizers with linearization
F016Field mount - Flow rate indicator / totalizer with linearization and pulse output
F018Field mount - Flow rate monitor / totalizer with linearization, pulse/alarm and analog outputs and HART communication
F112Field mount - Flow rate indicator / totalizer with linearization, analog and pulse outputs
F118Field mount - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse outputs
D016DIN Panel mount - Flow rate indicator / totalizer with linearization and pulse signal output
E018Explosion proof - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse signal outputs and HART Communication
E112Explosion proof - Flow rate indicator / totalizer with linearization, analog and pulse outputs
 
Flow rate Monitors / Totalizers with HART Communication
F018Field mount - Flow rate monitor / totalizer with linearization, pulse/alarm and analog outputs and HART communication
E018Explosion proof - Flow rate monitor / totalizer with linearization, high / low alarms, analog and pulse signal outputs and HART Communication