Personal Reliable Professional Outgoing

PERSONAL

Fluidwell stands for long term relationships and attentive and close cooperation. We go for personal relationships.

RELIABLE

Reliability of our products and high quality services are essential to us. You`ve got to have a Fluidwell, count on us.

PROFESSIONAL

Helping businesses grow by providing a dedication to mutually beneficial long term relationships. Your success is our goal.

OUTGOING

Progress and success are achieved due to our knowledgeable, friendly and competent staff. It happens at Fluidwell!

News

Smart K-factor conversion in our E-Series

The K-factor is a number that represents the amount of pulses which relates to the quantity of a material that passes the flow meter. It is also expressed as: number of pulses per unit of measure.
The automatic unit conversion in our "E-Series - Explosion proof Flowcomputers" is a feature that simplyfies your setup, it avoids entering 2 different K-factors for the (acc) Total and Flow rate.

When you want both the Flow rate and Total to be displayed in the same volumetric or mass Flow measuring units, you can use the automatic unit conversion.
Units which can be selected are:

  • Volumetric: L, M3, US Gal, iGal, CF, Oil bbl, NL, Nm3, SCF, ML
  • Mass: Kg, Ton, Lb, US Ton, MG, G

When you want the measuring unit for flow rate to be volumetric and total to be mass or vice versa; or if you need a non-convertible measurement unit such as pulses, revolutions or no measuring unit. You will need to use the manual (hand) mode.

Convince yourself

Check this interactive tutorial and experience how easy it is to configure the automatic unit conversion at our E-Series Explosion Proof Totalizers.
This tutorial shows an E-Series with realistic clickable buttons, to simulate exactly how an E-Series will operate when you program it yourself.

 

START INTERACTIVE TUTORIAL

 

The K-factor setting should be configured before installation to ensure correct measurements in any situation.
Note: When certain settings are changed during daily operation. These settings will only influence new measurements.