B-Connected
Basic - Flow rate Indicator / Totalizer
with Modbus communication and isolated outputs
Product description
The Modbus communcation and isolated analog and pulse output signals make the B-Connected flow rate indicator / totalizer a dedicated flow transmitter for connection to an automation network or PLC. The display shows flow rate, total and accumulated total. The scaled pulse output re-transmits the accumulated total. The analog output re-transmits the flow rate. On-screen engineering units are easily configured from a comprehensive selection.
Advantages
- Basic flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
- The B-Series is our most cost effective display but with all the benefits you may expect from a Fluidwell product: It’s durable, reliable and very easy to operate. Basic with a capital B!
- Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.
Downloads
Thank you
You will receive a email with the download link soon.
Features
- Compact design.
- Displays instantaneous flow rate, total and accumulated total.
- Isolated analog and pulse outputs.
- Modbus RS485 communication.
- Durable IP65 (Type 4X) field, wall or meter mount enclosure.
- One 20mm (0.79") and two 16mm(0.63") knock-out hole cable entries.
- “Know one, know them all” configuration structure.
- Easy reading and programming with clear alphanumerical display.
- Clear 12mm(0.5”) numeric digits and 7mm(0.3”) alphanumeric digits.
- Bright LED backlight.
- Auto backup of settings and running totals.
- Lithium AA battery and 10 - 30V DC power supply.
- Sensor supply: 8.2V DC.
- Easy configurable via PC with free downloadable remote configuration tool and special communication cable (ACE06).
- Various accessories are available for this product.
Applications
- Basic flow rate monitoring with a precise calculation over the full measurement range, where a connection to an automation network or PLC is required.
- The B-series offers you an economical solution for common industrial applications. Nothing more, nothing less.
Product specifications
-
Signal Inputs
-
Flowmeter Inputs
- Basic types of flowmeter signals: Namur, Reed-switch, NPN, PNP and Sine wave (coil).
-
-
Signal Outputs
-
Pulse outputs
- Function: Isolated, scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons).
Frequency: User definable: Off, Long (5Hz/100msec), Intermediate (33Hz/15ms). - Type: One isolated solid state output.
- Function: Isolated, scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons).
-
Alarm outputs
- None.
-
Analog outputs
- Function: Re-transmitting the flow rate - the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).
- Type: One isolated 4 – 20mA output.
-
Control outputs
- None.
-
-
Supply
-
Power Supply
- A single 3,6V lithium AA battery.
- 10 – 30V DC.
-
Sensor Supply
- 8.2V DC.
-
-
Hazardous Area
-
Intrinsically Safe
- For Intrinsically Safe applications we recommend the F-Series.
-
Explosion Proof
- For Explosion Proof applications we recommend the E-Series.
-
Class I, Division 2
- For Class I, Div. 2 applications we recommend the F103.
-
-
Communication
-
- Function: All process data and settings can be read and modified through the communication link.
-
- Protocol: Modbus RTU.
-
- Interface: RS485 2-wire.
-
- HART communication is available with the F018 Flow rate Monitor / Totalizer.
-
Alternative products
Questions and answers
No questions have been asked about this article yet.
Ask a questionThank you
Your question has been forwarded to our support team.
We will answer it as soon as possible.